Teltonika 4G-RUT240 Compact Industrial 4G LTE Router

Product Information

If we compare RUT240 and RUT241, we will see equal measurements and interfaces. It offers three connectivity options (cellular, Wi-Fi, and wired), a digital I/O, and three antenna connectors. However, inside these routers, you will find different CPUs: Qualcomm Atheros Hornet (MIPS 24Kc 400 MHz) in the RUT240 and MediaTek (MIPS 24Kc 580MHz) in RUT241. Besides, the RUT241 comes with a doubled RAM capacity of 128MB and offers even better value than before. TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL) L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs’ code Maximum time (in seconds) the button can be held to perform an action, after which no action will be performed.

Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.Leis seo, dearbhaíonn TELTONIKA NETWORKS go gcomhlíonann an RUT240 seo bunriachtanais agus forálacha ábhartha eile Threoir 2014/53/EU The General section is used to set up some of device managerial parameters, such as changing device name. For more information on the General section, refer to figure and table below.

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T PoE (passive) Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3btAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength A Phone Group is a collection of phone numbers that can be used as the recipient in SMS & call related services instead of specifying every number individually. The phone group list is empty by default thus, you must first add at least one new group before you can add phone numbers to it. To create and begin editing a phone group, follow these steps: PoE (passive): Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929

TELTONIKA NETWORKS декларира, че RUT240 е в съответствие със съществените изисквания и другитеприложими разпоредби на Директива 2014/53/EU Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields Specifies when the period of counting data usage should begin. After the period is over, the limit is reset and the count begins over again. A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease). Force intervals to accept last day of month as valid option if selected day doesn't exist in ongoing month.This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20 cm from all persons. WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log